SKU: PT021684

PROTAPER CLAMP-ON FULL DIAMOND GRIP

$47.50

or 4 payments of $11.88 with Info

In Stock


Description

Using the latest in grip technology and molding techniques, ProTaper’s Clamp-On Grip System offers the comfort and control of traditional grips with the added advantage of quick, effortless installation. The design eliminates the need for glue and safety wire, yet ensures durable, slip-free performance.

ProTaper’s exclusive, super-slim clutch-side Windowed Core not only minimizes the outer grip diameter, but also delivers critical relief areas for the palm and fingertips. The result is increased impact and vibration damping over competing solid-core designs, leading to significantly improved rider comfort and control.

The grip surface utilizes an extra-supple, tacky compound that is seamlessly molded to the inner core. This provides maximum comfort and traction and alleviates blistering. A firmer compound is used in the flange and endcap areas to resist crash damage and reduce wear.

 

INSTALLATION INSTRUCTIONS


Recommended: If you are unfamiliar with motorcycle mechanics, seek a qualified motorcycle technician to perform the installation for you.


Throttle Side: Take note of your motorcycle's throttle cable routing to ensure that you reinstall the cable(s) correctly (it is recommended that you take a photo for reference). Loosen and remove the throttle housing bolts. Open the throttle housing, disengage the cable(s) from the throttle tube, remove the throttle tube, and set it aside. Next, using the application table on this sheet, select the appropriate throttle cam for your motorcycle.


Using your stock throttle tube and grip placement as a guide, position the appropriate cam onto the Clamp-On throttle tube with "this side out" facing away from the grip. After properly aligning the splines, press the cam into place. It should appear flush with the throttle tube when fully engaged. Note: You moy need to adjust the orientation of the throttle cam to achieve the desired grip pattern placement. Clean the handlebar surface thoroughly. Slide the Clamp-On throttle tube onto your handlebar and insert the cable(s) into the throttle cam. Verify that the cables are correctly aligned, that they are not being pinched, and that the cable ends are properly seated.


Reinstall the throttle housing and lightly tighten the bolts. Make sure that the throttle twists freely and snaps to the off position without drag or interference. Reposition the throttle assembly as needed to achieve an easy twist and drag-free return. Confirm that the cables are correctly routed and finish by torquing the throttle housing bolts to the
motorcycle manufacturer's specifications.


Clutch Side: Remove your old grip and clean the handlebar surface thoroughly, removing any glue or other
debris. Do not expose the Clamp-On grip to contact cleaner or other harsh solvents, as these can damage the grip compounds. Slide the clutch-side Clamp-On grip onto the handlebar until the grip endcap touches the end of the handlebar. If your handlebars have aggressive knurling, you may need to install the clamp and grip assemblies separately. Position the grip pattern as desired. Once in place, torque the clamp bolt to 44 in·lb (5N·m) using a 3mm hex key to secure the grip. The clamp and bolt should be checked periodically and replaced if damaged.


Important: For safety reasons, it is highly recommended that you test your motorcycle's controls any time you make adjustments or changes. Before getting on the track, find a safe area and ride slowly, making sure the controls are working correctly and nothing seems out of place.

 

THROTTLE CAM APPLICATION TABLE


Honda  Year Engine Type Cam #
CR125R/250R/500R  96-07 2-Stroke 5
CRF250R/250X/450R/450RX/450X  02-18 4-Stroke 2
Husqvarna  Year Engine Type Cam #
TC/TE 125/250/300  14-16 2-Stroke 5
TC/TE/TX 125/250/300  17-18 2-Stroke 7
FC 250/350/450  14-15 4-Stroke 3
FE 250/350/450/501  14-16 4-Stroke 3
FC 250/350/450  16-18 4-Stroke 4
FE/FX 250/350/450/501  17-18 4-Stroke 4
Kawasaki  Year Engine Type Cam #
KX125/250  93-07 2-Stroke 6
KX250F/450F  04-18 4-Stroke 1
KTM  Year Engine Type Cam #
SX/EXC/XC-W/XC/MXC 125/144/150/250/300/380  96-16 2-Stroke 5
SX/EXC/XC/XC-W 125/150/250/300  17-18 2-Stroke 7
SX-F/XC-F/EXC 250/350/450/520/525  03-15 4-Stroke 3
SX-F 250/450 Factory Edition  15.5-17.5 4-Stroke 4
EXC-F/XCF-W 250/350/450/500/520/525  03-16 4-Stroke 3
SX-F/XC-F 250/350/450  16-18 4-Stroke 4
EXC-F/XCF-W 250/350/450/500  17-18 4-Stroke 4
Suzuki  Year Engine Type Cam #
RM125/250  93-08 2-Stroke 6
RM-Z250/450  04-18 4-Stroke 1
Yamaha  Year Engine Type Cam #
YZ125/250  93-18 2-Stroke 6
YZ250F/WR250F  01-18 4-Stroke 1
YZ450F/426F/400F  98-18 4-Stroke 1
WR450F/426F/400F  99-18 4-Stroke 1

Specifications

SKU PT021684
Brand Protaper
Shipping Weight 0.1000kg
Shipping Width 0.100m
Shipping Height 0.100m
Shipping Length 0.100m
Shipping Cubic 0.001000000m3

Reviews

Be The First To Review This Product!

Help other Garage 444 Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category


$19.95

or 4 payments of $4.99 with Info

SKU: RHKBECO6-R

RHK Red Handlebar Bar Ends

$19.95

or 4 payments of $4.99 with Info

SKU: 70-CAP-29G

STATES MX OFF-ROAD BAR ENDS - GOLD

$17.99

or 4 payments of $4.50 with Info

SKU: MIR64586

Universal Folding Mirror Enduro 7/8" Black (Pair)

$109.00

or 4 payments of $27.25 with Info

SKU: OXOX538

OXFORD HORIZON BILLET ALLOY BAR END MIRROR RIGHT BLK

$14.95

or 4 payments of $3.74 with Info

SKU: 22-67300

FACTORY EFFEX MOTO GRIP DONUTS HONDA RED/BLACK

$17.99

or 4 payments of $4.50 with Info

SKU: OXOX596

OXFORD HANDLEBAR BAR ENDS 2 BLUE ANODISED

$14.95

or 4 payments of $3.74 with Info

SKU: 17-67300

FACTORY EFFEX MOTO GRIP DONUTS HONDA RED

$109.00

or 4 payments of $27.25 with Info

SKU: OXOX536

OXFORD STREET BILLET ALLOY BAR END MIRROR RIGHT BLK